Alexa, turn on my home theater–AnyMote Awesomeness

Heaven forbid that I should have to lift a handheld remote in my very Smart Home. I got to thinking that with everything I’ve voice enabled here, I had not done anything with my home theater equipment. I’ve got a bunch of stuff downstairs in the Living Room and a bunch of stuff in the Master Bedroom. I’ve already got a Harmony Ultimate Hub/Remote in the Bedroom and an old and dying Harmony 1100 in the Living Room that I’m replacing with AnyMote Home.

I decided it was time to experiment with Alexa voice control. The TLDR; version of this post is that AnyMote, which takes concentration and time to set up (and is pretty geeky when it comes to advanced functions), coupled with the Alexa AnyMote skill is awesome.

Here’s a quick list of what my two Home Theater’s include for major components:

Living Room Bedroom
Samsung LN52B750 TV

Sony STR-DA4ES Receiver

Samsung BD-F5900 BD Player

Comcast DCX 3400 DVR

Apple TV

Amazon Fire TV

WD Live Hub

Microsoft Wireless Display Adapter

5.1 Surround Speakers

Old Yamaha Receiver

Old LT-P326W Samsung TV

Comcast DCX 3400 DVR

Samsung BD-5900 BD Player

5.1 Surround Speakers

anymoteHarmony 1100 harmony hub

The Living Room (My Main Home Theater)

In my Living Room, my goal was to replace the dying Harmony 1100. I thought about getting another Harmony Hub for the Living Room to use with my iPad Air, but was concerned that when I got to voice enabling it that there would be conflicts with the Bedroom Harmony Hub (see below on the Master Bedroom) AND I’m not very fond of the individual device control interface for Harmony on the iPad. And Amazon had the AnyMote Home on sale for $89.00. Plus, AnyMote allows Alexa voice control of individual “buttons” (which is not the case with using the Harmony routines) as well as macros (activities).

AnyMote is an amazing tool. It’s a geek treasure hunt (like peeling back layers of an onion) that leads to discovery of the many things this little gadget can do when coupled with a supported device and I’ve barely scratched the surface. I used my iPad Air to set things up (and will also be using my iPhone) as I wanted the larger screen for first time set up. I pretty much found built in codes for most of my (aging) home theater components; I had to use the record a button feature to get a few things to work properly, but I got the basic functions working and tested fairly quickly.

After insuring the remotes were configured correctly and buttons were working properly, I jumped in and created macros that turned on three devices and set the proper inputs, etc. I started with 4 so that I could control my set top box and my BD ROM player; one each to turn everything on and one each to turn everything off. I used longish delays between powering on and off components so that I could properly test (see image below) and have been adjusting the delays as I go. Below is one of the macro in progress where I can stack commands and delays.

macro

I created a blank Smart Home Remote and named it Home Theater and imported the 4 macros. I was itching to try the Alexa AnyMote Skill, so I stopped there and got that up and running. Pairing with Alexa is built in to the AnyMote App; a phrase is displayed that you speak, and Alexa complies and acknowledges.

pair alexa

After pairing is complete, the AnyMote App displays an abbreviated tutorial (which didn’t cover everything I needed, but there is more information on the AnyMote Knowledge Base which answered most of my questions. Basically, you tell Alexa the name of the button to action and the device remote to use, e.g., “Alexa, tell AnyMote to MUTE my Sony Receiver”. For macros, the syntax is “Alexa, ask AnyMote to execute [macro_name]”.

pairing tutor

Watch Alexa and AnyMote in action in my Living Room. Alexa runs my macro to turn on three components to watch Cable TV. Next, Alexa opens MyDVR via AnyMote:

I created some macros for my favorite TV channels as well. When I tested them, I found that Alexa didn’t like some of the names I’d selected – neither MAX HD or MAX was recognized by Alexa, but CINEMAX worked fine. Go figure. Below is a screen shot that pretty much shows where I am at this point (with lots more to figure out and implement)

anymote finished

One of the gotchas’s is that every time you create new macros, apparently you need to disable the AnyMote Alexa Skill in the Echo App, repair your AnyMote with Alexa (which resynchronizes everything). It isn’t a big deal, but it is annoying.

Editing the visuals of a remote is also available. Inside the remote editor, I can change themes, button colors and text and use built in icons. I couldn’t get the channel icons for the United States to appear/work, so I settled for color coding the channels that I created macros for. I’m probably missing something obvious, but for now I can tell Alexa “Ask AnyMote to execute HBO” and the channel changes. Or I can push the buttons on the iPad.

I saw some negative comments about AnyMote, but I highly recommend this device and app if you’re comfortable with doing tweaking and fine tuning to get things “just right”.

The Master Bedroom

I have a SmartThings Hub that I was not using (I’d bought it in my quest to voice enable my Sonos speakers, but it didn’t meet my expectations so I went elsewhere to fill that need). I remembered that SmartThings was supposed to work with Logitech Harmony Wi-Fi based remotes, so with nothing to lose, my first task was to see what I could accomplish with my bedroom home theater gear.

SmartThings requires a whole series of steps, done in a particular order, to add “things” and authorize for use with Alexa (I’d previously disabled SmartThings in the Alexa App after the Sonos experiment.) Harmony remotes use “Activity” based commands (macros) and it looked like that these activities could be voice enabled (but not individual control of devices, like Play, Pause, Stop, Eject, etc. for an individual component). The process for me was a little rocky. SmartThings discovered my activities after I linked with my Harmony account and imported them as “Watch TV [Harmony Control]”, “Watch a DVD [Harmony Control]”, etc., so I had to rename them (deleted the [Harmony Control] part) and then relink SmartThings with Alexa.

Fortunately, the Alexa App is very smart and lets you pick which SmartThings devices to control.

smartthings1

I ran Discovery in the Alexa App and the two “activities” were discovered and added. However, Alexa just didn’t seem to understand the “Watch a DVD” or “Watch TV” syntax. I tried speaking slowly, quickly, but Alexa kept offering to play songs from my Music Library or other responses. After a while I decided that maybe renaming the activities was the solution. So I renamed to “My Movie Theater” and “Xfinity”.

 

smartthings2

I then disabled SmartThings in the Alexa App and unlinked SmartThings and relinked, etc. but couldn’t get Discovery to find the new named activities. I had to unlink/remove AND remove the Harmony Remote from SmartThings and re-run discovery for Things, rename to My Movie Theater and Xfinity, relink to Alexa and THEN run discovery to get the selected activity/Things to appear. Eureka. This works.

When I tell Alexa (via my upstairs Dot) to “Turn on My Movie Theater”, all the right things happen. The components are properly powered on and the handheld Harmony remote actually changes to reflect the running Activity so that I can use the buttons to Play, Pause, FFW, etc. I wish I could tell Alexa to “Play”, “Pause”, etc. and maybe someday I WILL be able to do this. I wasn’t too enthralled by the SmartThings setup process. I know Yonomi also can link to Harmony, but I wanted to first try my neglected SmartThings Hub. I’m sure Yonomi will be smoother, but again, only the Activities (macros) will be supported.

For me, AnyMote is the clear winner in Home Theater control. I’m using maybe 25% of its capabilities and as time goes on, I’ll be experimenting with other functionality.