tomorrow's connected future is here today

Technology

How to get WPA2-PSK on D-Link DI-624 Rev C and many D-Link G PC Cards

While writing a column for the Expert Zone and lamenting over the lack of WPA2–Personal (PSK) upgrades for existing hardware, I sleuthed some info that I’m going to share in this blog prior to publishing in my column.

Disclaimer (unless you live in the UK or Canada for the router piece): Do all of this at your own risk. You know, professional driver on a closed course. Results may vary.

First, if you own D-Link DWL-G650 Rev B or C cards, DWL-AG660 or the soon to be released DWL-G680, go to ftp://ftp.dlink.com/Wireless/dwlg520_revB/Drivers/ and get dwlg520_revB3_drivers_318.zip. Yeah, I know it says 520. Extract it to your hard drive and run the setup program. If prompted do NOT disable WZC. Next, insert your card/select update driver, and use the have disk option to manually select the driver to install. Point at the Drivers directory where you extracted the zip file. If prompted that it is not for your hardware, etc. etc. install it anyway. Take the leap of faith.

If you have a D-Link 624 router, hardware Rev Cx, go to the D-Link UK ftp site ftp://ftp.dlink.co.uk/di_broadband_gateways/DI-624_rev_cx/ and grab di-624_rev_cx_fw_v2.53.zip. Update your router’s firmware. The firmware has all the US allowed channels and no non allowed channels. If you live in Canada, try http://support.dlink.ca/ProductView.asp?ProdID=219

Automatic Self Configuring Secure Wireless Home Networks

No longer are self configuring secure wireless home networks the stuff of dreams and imagination. The average residential user just can’t cope with the hoops needed to configure a wireless network and secure it. Windows XP’s Wireless Network Setup Wizard and Windows Connect Now, coupled with some of the latest network as well as consumer electronics gear, provide the residential user with a new and bulletproof way to setup a wireless network from scratch.

But you have to have the “right stuff” from the right vendor. D-Link has done it up right. Check out their DI-624S ‘wireless storage router’. This router can be configured with a USB Flash Drive/thumb drive/memory key that was used with the XP Wireless Network Setup Wizard. Even better, when you’re finished with setup, the two USB ports on the router itself provide shared Network Attached Storage for USB hard drives and Flash drives for any computer on the network.

Even more exciting is the extension of the Windows Connect Now technology to consumer electronics devices such as wireless streaming media players. Check out D-Link’s latest MediaLounge (DMS-320RD). Here’s what happened after I plugged a USB Flash Drive with my WCN network settings into the WCN USB port on the back of this device.

Medialounge001

 

I’d configured the network with strong WPA-PSK security using a 63 character random passphrase. After OK’ing this with the supplied remote control, the secure wireless connection was made, the device received an IP via DHCP from the router and I was off and running.

I’m impressed.

More in my Expert Zone column

Read this blog with my Windows 8 App

Get the App

Categories
Archives