How to get WPA2-PSK on D-Link DI-624 Rev C and many D-Link G PC Cards
While writing a column for the Expert Zone and lamenting over the lack of WPA2–Personal (PSK) upgrades for existing hardware, I sleuthed some info that I’m going to share in this blog prior to publishing in my column.
Disclaimer (unless you live in the UK or Canada for the router piece): Do all of this at your own risk. You know, professional driver on a closed course. Results may vary.
First, if you own D-Link DWL-G650 Rev B or C cards, DWL-AG660 or the soon to be released DWL-G680, go to ftp://ftp.dlink.com/Wireless/dwlg520_revB/Drivers/ and get dwlg520_revB3_drivers_318.zip. Yeah, I know it says 520. Extract it to your hard drive and run the setup program. If prompted do NOT disable WZC. Next, insert your card/select update driver, and use the have disk option to manually select the driver to install. Point at the Drivers directory where you extracted the zip file. If prompted that it is not for your hardware, etc. etc. install it anyway. Take the leap of faith.
If you have a D-Link 624 router, hardware Rev Cx, go to the D-Link UK ftp site ftp://ftp.dlink.co.uk/di_broadband_gateways/DI-624_rev_cx/ and grab di-624_rev_cx_fw_v2.53.zip. Update your router’s firmware. The firmware has all the US allowed channels and no non allowed channels. If you live in Canada, try http://support.dlink.ca/ProductView.asp?ProdID=219